- Common Fluid Capacities -
S650 FLUID CAPACITIES | UNITS |
Fuel | 90.5 L (23.9 gal) |
Engine Oil with Filter Change | 11.4 L (12.0 qt) |
Engine Cooling System with Heater | 11.7 L (3.1 gal) |
Engine Cooling System without Heater | 11.4 L (3.0 gal) |
Hydraulic / Hydrostatic Reservoir | 10.2 L (2.7 gal) |
Hydraulic / Hydrostatic System | 45.0 L (11.9 gal) |
Chaincase Reservoir | 39.2 L (10.35 gal) |
Air Conditioning Refrigerant (R-134a) | 0.9 kg (2.0 lbs) |
- Technical Machine Specifications -
Bobcat® S650 Specs
Turbocharged Engine | Standard |
Emission Compliance | Bharat Stage III |
Engine Cooling | Liquid |
Engine Fuel | Diesel |
Torque (SAE J995 Gross) | 194.71 ft-lbs |
Rated Operating Capacity CAPACITY (ISO 14397-1) | 2826.32 lbs |
Tipping Load (ISO 14397-1) | 8326.86 lbs |
Travel Speed | 7.08 mph |
Travel Speed (2-speed option) | 12.30 mph |
Fuel Tank | 27.20 gal |
Auxiliary Std Flow | 87.1 l/min |
Auxiliary High Flow (Optional) | 115.5 l/min |
System Relief @ Quick Couplers | 241.32 bar |
Length without Attachment | 108.38 in |
Length with Standard Bucket | 136.81 in |
Width (without bucket) | 72.08 in |
Width (with bucket) | 74.01 in |
Operating Height | 158.50 in |
Height with Operator Cab | 81.29 in |
Height to Bucket Hinge Pin | 123.97 in |
Dump height with Std Bucket | 96.33 in |
Dump reach at maximum height |
31.49 in |
Turning Radius | 82.91 in |
Wheelbase | 45.31 in |
Ground Clearance | 8.14 in |
Joystick Control | Optional |
Air Conditioning | Optional |
Adjustable Seat | Standard |
Backup Alarm | Standard |
BICS System (Interlock) | Standard |
Cab Enclosure | Optional |
Sound Option | Optional |
Cab Heater | Optional |
Operating Lights | Standard |
Parking Brake | Standard |
Radio | Optional |
Rear Window | Standard |
Top Window | Standard |
Lift-Arm Support | Standard |
Seat Belt | Standard |
Suspension Seat | Optional |
Two Speed Travel | Optional |
Deluxe Instrumentation | Optional |
Engine Shutdown | Standard |
Hydraulic Bucket Positioning | Optional |
High Flow Option | Optional |
Auxiliary Hydraulics | Optional |
Certain specifications are based on engineering calculations and are not actual measurements. This information is provided for comparison only and are subject to change without notice. Specifications for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.