Case TV380 Specifications

- Common Fluid Capacities -

TV380 (TIER 3) FLUID CAPACITIES	UNITS
Fuel	25.5 gal (96.5 L)
Engine Oil with Filter Change	10 qt (9.4 L)
Hydraulic System Reservoir	6.0 gal (22.7 L)
Hydraulic System Total	11.75 gal (44.5 L)

TV380 (TIER 4) FLUID CAPACITIES	UNITS
Fuel	25.5 gal (96.5 L)
Engine Oil with Filter Change	8.9 qt (8.5 L)
Hydraulic System Reservoir	6.0 gal (22.7 L)
Hydraulic System Total	11.9 gal (45.4 L)
Diesel Exhaust Fluid (DEF) Tank	2.8 gal (10.7 L)

 

---

 Need parts for your Case® TV380?

 

---

- Technical Machine Specifications -

Engine Type	Diesel, Turbo - Direct Injection
Emission Certification	Non-regulated/Tier 3
Engine Cooling	Liquid
Engine Fuel	Diesel
Peak Torque @ 1400 RPM	251 lb-ft (340 Nm)
Rated Operating Capacity  ( 50% of Tipping Load )	3,800 lbs (1,723 kg)
Rated Operating Capacity  ( Tipping Load )	7,600 lbs (3,447 kg)
Travel Speed ( Low Range )	5.1 mph (8.2 kph)
Travel Speed ( High Range )	7.6 mph (12.2 kph)
Fuel Tank	25.5 gal (96.5 L)
Auxiliary Std Flow	22.5 gpm (85 L/min)
Auxiliary High Flow (Optional)	34.6 gpm (131 L/min)
System Relief	3,000 psi (207 bar)
Length without Attachment	119.1 in (2.99 m)
Length with Standard Bucket	147.3 in (3.71 m)
Width (without bucket)	76.0 in (1.93 m)
Width (with bucket)	76.0 in (1.93 m)
Operating Height	166.0 in (4.11 m)
Height to Operator Cab	80.4 in (2.04 m)
Height to Bucket Hinge Pin	131.6 in (3.34 m)
Dump height  @ 45°	102.2 in (2.60 m)
Dump reach at maximum height @ 45°	31.4 in (0.80 m)
Turning Radius with 72 in Bucket	90.0 in (2.35 m)
Track on Ground	64.5 in (1.64 m)
Ground Clearance	9.5 in (0.24 m)
Breakout force @ 3,150 psi (217 bar) at Bucket Cylinders	7,510 lbs (33.4 kN)
Breakout force @ 3,150 psi (217 bar) at Lift Cylinders	6,020 lbs (26.8 kN)

 

Engine Type	Diesel, Turbo - Direct Injection
Emission Certification	Tier 4 Final
Engine Cooling	Liquid
Engine Fuel	Diesel
Peak Torque @ 1400 RPM	282 lb-ft (383 Nm)
Rated Operating Capacity  ( 50% of Tipping Load )	3,800 lbs (1,723 kg)
Rated Operating Capacity  ( Tipping Load )	7,600 lbs (3,447 kg)
Travel Speed ( Low Range )	5.1 mph (8.2 kph)
Travel Speed ( High Range )	8.0 mph (12.9 kph)
Fuel Tank	25.5 gal (96.5 L)
Auxiliary Std Flow	24.2 gpm (91.5 L/min)
Auxiliary High Flow (Optional)	37.6 gpm (142.5 L/min)
System Relief	3,046 psi (210 bar)
Length without Attachment	119.1 in (2.99 m)
Length with Standard Bucket	147.3 in (3.71 m)
Width (without bucket)	76.0 in (1.93 m)
Width (with bucket)	76.0 in (1.93 m)
Operating Height	166.0 in (4.11 m)
Height to Operator Cab	80.4 in (2.04 m)
Height to Bucket Hinge Pin	131.6 in (3.34 m)
Dump height  @ 45°	102.2 in (2.60 m)
Dump reach at maximum height @ 45°	31.4 in (0.80 m)
Turning Radius with 72 in Bucket	90.0 in (2.35 m)
Track on Ground	64.5 in (1.64 m)
Ground Clearance	9.5 in (0.24 m)
Breakout force @ 3,150 psi (217 bar) at Bucket Cylinders	8,776 lbs (39.0 kN)
Breakout force @ 3,150 psi (217 bar) at Lift Cylinders	6,300 lbs (28.0 kN)

- TV380 (TIER 3) Standard Equipment -

Operator Environment

• Enclosed Cab w/ Heater and AC
• Fully sealed and pressurized – FSP
• Glass door w/ wiper and washer
• Sliding side windows – removable
• Heater and air conditioner
• AM/FM radio w/ 2 speakers
• Keyless start ignition
• Tilt ROPS/FOPS
• Rear window w/ emergency escape
• Deluxe cloth, air suspension seat, w/ 2 in (51 mm) retractable 3 point lap seat belt w/ heater and lumbar support
• Hand and foot throttle
• Alarm package – back-up and horn
• Headliner; Dome Light
• Top window
• Cup holder
• 12V Power plug socket
• Foot rest; Seat Pocket
• Padded seat bar w/ integral armrests
• Loader control lockout system
• Electric parking brake control
• Operator’s compartment floor cleanout
• Proportional auxiliary hydraulic control – on joystick
• Advanced Instrument Cluster w/ digital hour meter, tachometer, Fuel level LCD bar graph w/ alarm, diagnostic features and security lockout

Engine

• F5C E5454 C*A003 195 CID (3.2 L) Turbo Non-regulated Tier 3 Turbocharged without waste gate fuel injection Horsepower: Gross: 90 (67 kW) Net: 84 (63 kW) Peak torque 251 lb·ft (340 N·m)
• 120 amp alternator
• Dual element air cleaner
• Organic Acid Technology (OAT)
• Anti-freeze solution to -34º F
• Fuel tank - 25.5 gal (U.S.)
• Over and under radiator and oil cooler
• 3-stack after cooler/radiator/oil cooler configuration
• Glow plugs
• Integral engine oil cooler
• Fuel filter with water trap
• 1,000 CCA 12V battery
• Master electrical disconnect

Drive Train

• 2-speed hydrostatic four wheel drive
• SAHR disc parking brake

Hydraulics

• Auxiliary hydraulics: @ 3,050 psi (210 bar) – 23.8 gpm (90 L/min)
• 6 micron oil filtration system
• 3-spool loader control valve
• Auxiliary hydraulic disconnects, ISO flat-face – connect-under-pressure with case drain
• Hydraulic circuit pedal lock
• Auxiliary function lockout override
• Loader lift lockout override
• Heavy-duty hydraulic oil cooler
• Loader arm float position
• Loader function lockout system
• Hydraulic one-way self-leveling
• Ride control

Loader

• Heavy duty hydraulic attachment coupler
• Vertical lift geometry
• Loader lift arm support strut
• SAE operating load: 3,800 lbs
• Tipping load: 7,600 lbs
• In-CAB loader lock

Tracks

• HiQual S-Wave Tracks

Other Standard Features

• Halogen lights - 2 front, 2 side, 2 rear flood
• Heavy duty front lights
• Pre-wired for rotating beacon
• Lockable service access hood
• Single-point daily service
• Rear tail lights Remote oil drain
• Remote oil and fuel filters
• Block heater
• Debris ingression sealing
• Machine protection auto shutdown
• Mounting points for add-on counterweights

---

- TV380 (TIER 4) Standard Equipment -

Operator Environment

• Enclosed Cab w/ Heater and AC
• Fully sealed and pressurized – FSP
• Glass door w/ wiper and washer
• Sliding side windows – removable
• Heater and air conditioner
• AM/FM radio w/ 2 speakers
• Keyless start ignition
• Tilt ROPS/FOPS
• Rear window w/ emergency escape
• Deluxe cloth, air suspension seat, w/ 2 in (51 mm) retractable 3 point lap seat belt w/ heater and lumbar support
• Hand and Foot throttle
• Alarm package – back-up and horn
• Rearview mirror
• Headliner
• Dome Light
• Top window
• Cup holder
• 12V Power plug socket
• Foot rest
• Seat Pocket
• Padded seat bar

Engine

• FPT F5H FL463 A*F001
• 207 CID (3.4 L) Turbo
• Tier 4 Final Certified
• Diesel Oxidation Catalyst (DOC) with
• Selective Catalytic Reduction (SCR) mufer
• Charged Air Cooler (CAC)
• High Pressure Common Rail (HPCR)
• fuel injection
• Horsepower:
• Gross: 90 hp (67 kW)
• Net: 84 hp (63 kW)
• Peak torque: 282 lb·ft (383 N·m)
• 160 amp alternator
• Dual element air cleaner
• Organic Acid Technology (OAT)
• Anti-freeze solution to -34º F
• Fuel tank - 25.5 gal (U.S.)
• Over and under radiator and oil cooler
• 3-stack after cooler/radiator/oil
• cooler configuration
• Glow plugs
• Integral engine oil cooler
• Fuel filter with water trap
• 1,000 CCA 12V battery
• Master electrical disconnect
• Jump Start Terminal

Drive Train

 

---

 

- TV380 (TIER 3) Optional Equipment - 

Operator Environment

• ROPS/FOPS Level 1 canopy with side screens
• Keyed start ignition
• Ventilation system with integrated heater
• Electro-hydraulic controls: For drive/steering, loader functions Switchable between H and ISO patterns Adjustable sensitivity of controls
• Mechanical hand controls
• Hand and foot controls: Hand controls the loader drive function and foot controls the bucket and boom
• Non suspension seat
• Suspension seat, vinyl
• Open cab interior trim package
• Demolition cab door with polycarbonate
• FOPS level 2
• Heavy duty rear door

Hydraulics

• High-flow auxiliary hydraulics – combined: @ 3,050 psi (210 bar) – 33.2 gpm (126 L/min)
• Enhanced High-flow auxiliary hydraulics – EHF: @ 4,000 psi (276 bar) – 35.0 gpm (132.5 L/min)
• Second auxiliary hydraulics

Loader

• Auxiliary front electric control
• Manual attachment coupler

Service Parts

• 3 inch (76.2 mm) retractable seat belt

Other

• Language decals
• Bolt-on bucket cutting edges
• Bolt-on heavy-duty bucket spill guard
• Special paint
• Offsite service arrangement
• Telematics

---

- TV380 (TIER 4) Optional Equipment -

Operator Environment

Certain specifications are based on engineering calculations and are not actual measurements. This information is provided for comparison only and are subject to change without notice. Specifications for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.